3. OPERATION KEY FUNCTIONS
ON/OFF
: ON/OFF key for the balance.
RE
: Improv ing unit weight by increasing samples.
SCS
: Used to command automatic calculation and storage of
average unit weight of sample materials in the unit.
Ｔ
: Tare and parameter change
R.M.
: Used to recall memorized Unit weight (and Tare) from memory-bank,
inputting code number by the ten -key.
No.
: Used to set code numbers for various Unit weight (and Tare)
banking, and memory look up for Unit weight (and Tare).
TARE PRESET
: Taring a known tare weight inputting by the ten-keys.
When needing to confirm tare weight, look up current tare value shown
on display for about 2 seconds after press
TARE PRESET
.
UNT.W. SET
: Used to unit weight setting.
Storing of a known unit weight inputting by the ten -keys.
LMT
: Used to limit function( comparator ) setting.
Storing of limit value for setting points.
MODE
:
Function/mode change. Function modes such as bar graph indication,
A u t o -Zero, Auto-Power off, stable judgment, resolution select,
Interface, unit selection and the calibration mode could be called by
P r e s s i n g t h e
MODE
key.
ADD
: A key performs like an adding key of a calculating function, adds a
counted result to the total.
SMPL SET
: Used to sample quantity setting.
Sampling by inputting known sample quantity from the ten -key.
0
t o
9
key : Ten numeric keys, called commonly as ten-keys.
.
key : Decimal point key, effective only in the setting of the unit weight and
t h e t a r e p r e s e t .
C/AC
: Used to clear the numbers inputted by the ten-key, unit weight data
and tare preset data clear.
4