5-7. Memory data call up in working area
1.
Enter ID number with numerical keys.
2.
Press
No.
key. (Memory data look-up.)
3.
Press
R
.
M
.
key. (The data set in the ID is called up to the working area.)
[To clear the working area data]
To clear data settings (both Unit W. and Tare),
press and hold down the
C/AC
key until the displays goes blank
．
5-8. Limit set and Comparing
[Limit Set]
Limit function must be set enable ( see function table and set).
You can set either one point or two points limit.
Press
LMT
key.
Li‑LO
appears at Weighing display, and low limit value shows
that currently set at UNIT.W display.
Enter low limit value with numerical keys.
Press
LMT
key. Low limit set, and a beep will sound to sign. Then
Li‑HI
appears at Weighing display, and high limit value shows that
currently set at UNIT.W display, then advance to the high
limit setting.
Enter high limit value with numerical keys.
Press
LMT
key. High limit set, and a beep will sound to sign. High limit set,
and go back to working area.
14