Shinko Denshi FZ100K1GEx, Operation Manual

Page: 65 / 108

FZ-Ex series operetion manual 6 External input / output functions
－
55
－
9
Set the stop bit.
Inputting of the setting value
Push the [Direction] key.
Select “418.ST.”.
Input a setting value.
「
418.ST. 1
」 ：
1 bit
「
418.ST. 2
」 ：
2 bits
10
Set unused high order digit.
Inputting of the setting value
Push the [Direction] key.
Select “419.NU.”.
Input a setting value.
「
419.NU. 0
」 ：
Fill with 0(30h).
「
419.NU. 1
」 ：
Fill with a blank space (20h).
11
Set the response command format.
Inputting of the setting value
Push the [Direction] key.
Select “41A.ES.”.
Input a setting value.
「
41A.ES. 1
」 ： “A00, Exx” format
「
41A.ES. 2
」 ：
“ACK, NAK” format
12
Set the output data format.
Inputting of the setting value
Push the [Direction] key.
Select “41B.DF.”.
Input a setting value.
「
41B.DF. 1
」 ：
6-digit numeric value format
「
41B.DF. 2
」 ：
7-digit numeric value format
13
Set the net value status output.
Inputting of the setting value
Push the [Direction] key.
Select “41C.NT.”.
Input a setting value.
「
41C.NT. 0
」 ：
None
「
41C.NT. 1
」 ：
Append
Output conditions
“413.oc.1”, “413.oc.3” “413.oc.6” can not be used.
6-9 Maintenance setting
Setting menu “42.DL.” are for the purpose of service maintenance. Please refrain from
performing setting.
If you should have performed setting, please notify the store where you purchased the
product.