Shining Technology CitiDISK HDV Quick Usage Guide v8.0 Shining Technology CitiDISK HDV Quick Usage Guide v8.0
Securing the FireWire Cable with Camcorder
Mounting Between Shoulder-mount Camera
and G-/V-Mount Battery with Optional
Pocket Adapter
Modifying Device Configuration Setting
8). Click on the
“
Modify device configuration setting
” button.
Make sure the Hardware ID shown is “Fw1256H” and Product ID is
“Shining CitiDISK HDV”.
The configuration setting comes preset and there is usually no
need to change it except the “User Config” sub-menu.
Click on
“User Config
” will display the next screen.
•
Plug in the 4-pin FireWire
connector into the camcorder
iLink port vertically.
•
Run the FireWire cable through
the handstrap and secure it.
•
Make sure the FireWire cable is
slightly tightened by the strap.
•
Zip the pouch halfway,
leaving the top portion of
pouch open for the
FireWire cable.
•
Run buckle across belt
and buckle it up.
•
Slide the CitiDISK HDV into
the PCKT1256 pocket adapter
(item not included and sold
separately).
•
Sandwich the pocket adapter
with the unit in between the
camera’s back and the
battery.
•
Connect the D-Tap power
cord between unit’s external
power input and one of the
D-Tap receptacles.
•
Insert the CitiDISK HDV upright inside the pouch.
P4
P13