Shini SMD-1000H, Manual

Page: 8 / 64

8(64)
1.1 Coding Principle
SMD -xxx H
Shini Mold Sweat Dehumidifier
Honeycomb Rotor
Note *
Dehumidifying Air Quantity (m 3 /hr)
D=Dew-point Monitor CE=Conformity
1.2 Feature
1) Standard configuration
●
Accurate control and display of regenerative temp. by using P.I.D. control.
●
Honeycomb rotor is used to ensure constant air dehumidifying effect.
●
Microprocessor board is fitted to indicate machine running status and to
diagnose malfunctions.
●
Motor overload and phase reverse alarm functions are included.
●
Return air cooling and filtering are included.
●
Under normal state and atmospheric conditions, the humidity content of air
can be controlled exactly all year round.
●
Inhibits corrosion and prolongs service life of the mould, and yet reduces
moulding cycle time.
●
Air temperature generated by this series of machine is about 30
℃
, this
ensures moisture condensation in the moulding area will not occur on the
view window of the moulding machine.
2) Accessory option
●
Return air collector is optional, a return air collector is used to collect return
air from the moulding area back to this machine and to form a closed-loop air
circulation, which is particularly practical in tropical climate.
●
Dew-point monitor can be fitted as option to detect dry air quality.