Shini SMD-1000H, Manual

Page: 63 / 64

63(64)
6.1 Maintenance Schedule
6.1.1 General Information of the Machine
Model SN Manufacture date
Voltage
Ф
V Frequency Hz Power kW
6.1.2 Installation & Inspection
Check if the air pipe are tightly connected.
Check if the material clearance door tightly closed.
Check if the air pipes are correctly connected.
Electrical Installation
Voltage V Hz
Fuse melt current
：
1 Phase A 3 Phases A
Check phase sequence of the power supply.
Check rotating direction of regenerating motor.
6.1.3 Daily Checking
Check the switch of the machine.
Check auto start-up of the machine.
Check the temperature controller.
Clean the filter.
Check whether overheat protection is normal.
Check whether dew-point is normal.
Check whether cooling water circulation and Y-type fitter are normal
1
.
6.1.4 Weekly Checking
Check all the electric wires.
Check loose electric connections.
Check and clean compressed air filter and regulator.
Check magnetic valve.
Check motor overload relay and phase-reversed prevention function.
Check whether air pipe is shed, leaked and loose.
6.1.5 Monthly Checking
Check if the belt is loose or not.