73(83)
4.11 Wrong Codes Remark
Table 4-2
：
Wrong Codes Remark
Wrong codes
Remark
E-01
Break of temperature-sensed line
E-02
Inverse phase
E-03
Overload input
E-04
Overheat input for regen. EGO
E-05
Maximum temperature protection
E-07
Thermal protection temperature
E-08
Memory errors
E-09
Rotor Microswitch input
E-11
Reversed-phase of temperature sensed line
E-12
Auto-tuning errors
4.12 Installation for Dewpoint Monitor
1) Use blade to cut off the film and outline the reserved hole site on the SCD
control panel.
Picture 4-10
：
Hole Site
2) Check if there are complete parts for dewpoint monitor including:
Dew-point monitor
Dew-point transmitter assembly (dew-point detector, detection cable, washer
and installation guide)
