Shindaiwa T2822X, Owner'S/Operator'S Manual

Page: 7 / 32

7
Assembly
This unit comes fully assembled with the exception of the cut-
ting attachment shield and cutting attachment.
Prior to Assembly
Before assembling, make sure you have all the components
required for a complete unit and inspect unit and compo-
nents for any damage.
■
Engine and shaft assembly
■
Cutting attachment shield
■
Cutting attachment
■
Owner’s/operator’s manual
■
Emission Control Warranty Statement
■
Assembly Tool (s)
■
Barrier Bar
■
Shoulder Harness
■
Safety Glasses
1. Remove bolt (A) and remove handle spacer (B).
2. Position the handle forward of the Handle Positioning Label (D) at the best posi-
tion for operator comfort.
3. Install barrier bar (C) and secure with bolt (A).
Handle
WARNING!
A standard grass trimmer unit with loop handle should NEVER be oper-
ated with blade-type attachments. For blade use, the trimmer must be fitted
with a bicycle-type handlebar or barrier bar that is located in front of the
operator to reduce the risk of the operator coming in contact with the cut-
ting attachment. (Per ANSI B175.3). When using a blade, the unit must be
equipped with a harness or strap.
A
B
C
D
An Emission Control Label is located on the engine. (This is an EXAMPLE ONLY; information on label varies by
engine FAMILY).
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 50 or 300 hour emission compliance period is the time span selected by the manufacturer certifying the en-
gine emissions output meets applicable emissions regulations, provided that approved maintenance procedures
are followed as listed in the Maintenance Section of this manual.