background image

50 FEET

(15m)

KEEP BYSTANDERS AWAY

AT LEAST 50 FEET (15m)

BEWARE OF THROWN OR

RICHOCHETED OBJECTS

KEEP AWAY FROM

ROTATING BLADE

Shindaiwa 

READ THE 

OPERATOR’S MANUAL

WEAR HEARING AND 

ANSI Z87.1 APPROVED 

EYE PROTECTION

P/N 19422-00046

3

ALWAYS

 wear eye protection to shield 

against thrown objects.

NEVER

 run the engine when  transport-

ing the unit.

NEVER

 run the engine indoors! Make 

sure there is always good ventilation. 
Fumes from engine exhaust can cause 
serious injury or death.

ALWAYS

 use the proper cutting tool for 

the job.

ALWAYS

 clear your work area of trash or 

hidden debris that could be thrown back 
at you or toward a bystander.

ALWAYS

 stop the engine immediately 

if it suddenly begins to vibrate or shake. 
Inspect for broken, missing or improperly 
installed parts or attachments.

ALWAYS

 keep the unit as clean as prac-

tical. Keep it free of loose  vegetation, 
mud, etc.

ALWAYS

 hold the unit firmly with both 

hands when cutting or trimming, and 
maintain control at all times.

ALWAYS

 keep the handles clean.

ALWAYS

 disconnect the spark plug wire 

before performing any  maintenance 
work.

Work Safely

This machine operates at very high 

speeds and has the potential to do seri-

ous damage if misused, abused or mis-

handled. To reduce the risk of injury, 

you must maintain control at all times, 

and observe all safety precautions dur-

ing operation. Never permit a person 

without training or instruction to operate 

this machine!

Safety

WARNING!

Never make unauthorized 

attachment installations.  Do not  
use attachments not approved by 
Shindaiwa for use on this unit.

WARNING!

Never operate 

power equipment of any 
kind if you are tired or if you are under 

the influence of alcohol, drugs, medica

-

tion or any other substance that could 
affect your ability or judgement.

WARNING!

Use Good Judgement

Stay Alert

You must be physically and mentally fit to 

operate this unit safely.

IMPORTANT!

Safety and Operation Information Labels: Make sure all 

information labels are undamaged and readable. Imme-

diately replace damaged or missing information labels. 

New labels are available. Contact your local authorized 

Shindaiwa dealer.

Summary of Contents for LE242/EVC





























































Reviews: