Shindaiwa EB212 Owner'S/Operator'S Manual Download Page 3

3

P

ower

 B

lower

 

o

Perator

'

s

 M

anual

personal

 

condItIon

 

and

 

safety

 

equIpment

  

  WARNING  

Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are 

not followed.  Proper clothing and safety gear must be worn when operating unit.

s

afety

manual

 

safety

 

symbols

 

and

 

Important

 

InformatIon

 

Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages preceded 

by symbols or key words.  The following is an explanation of those symbols and key words and what they mean to you.

   WARNING

The safety alert symbol accompanied by the word 

“WARNING” calls attention to an act or condi-

tion which CAN lead to serious personal injury or 

death if not avoided.

CIRCle ANd slAsh symbol

This symbol means the specific action 

shown is prohibited. Ignoring these prohi-

bitions can result in serious or fatal injury.

   CAUTIoN

The safety alert symbol accompanied by the word 

“CAUTION” calls attention to an act or condition 

which may lead to minor or moderate personal 

injury if not avoided.

NOTE

This enclosed message provides tips for use, care and 

maintenance of the unit.

IMPORTANT

The enclosed message provides information neces-

sary for the protection of the unit.

   dANGeR

The safety alert symbol accompanied by the word 

“DANGER” calls attention to an act or condition 

which WILL lead to serious personal injury or 

death if not avoided.

InternatIonal

 

symbols

symbol 

description/application

symbol form/shape

symbol 

description/application

symbol form/shape

Read and understand  

operator's manual.

Fuel and oil mixture

hot 

surface

Wear eyes, ears and 

head protection

Finger severing

safety/Alert

Wear hand 

protection. Use 

two handed.

do NoT smoke 

near fuel.

do NoT allow 

flames or sparks 

near fuel.

Wear slip resis-

tant foot wear.

symbol 

description/application

symbol form/shape

symbol 

description/application

symbol form/shape

Carburetor adjustment

- Idle speed

Carburetor adjustment

- high speed mixture

emergency stop

Carburetor adjustment

- low speed mixture

Ignition

oN/oFF

Primer bulb

Choke Control 

"Cold start"  

Position 

(Choke Closed)

Choke Control 

"Run"  

Position 

(Choke open)

Idle speed

Fast speed

Summary of Contents for EB212





























Reviews: