Shindaiwa C242S, Owner'S/Operator'S Manual

Page: 6 / 24

Attac
h ha
ndle
on
this
line
1. Using the hex wrench, loosen the joint
bolt.
2. Slip the outer pipe into the joint until
the pipe bottoms. The outer pipe or
gearcase
shaft may
have to
be rotated
slightly for
the splines
on the
mainshaft
to fully
engage to
the engine.
Figure 5A
Outer Pipe Assembly
Fan Cover Housing
Engine Assembly
T242
Mainshaft
Tank Guard
Figure 5B
Outer Pipe Assembly
Fan Cover Housing
Engine Assembly
C242
Mainshaft
Figure 5C
Tank Guard
Assembly of the Outer Pipe
Assembly and Adjustments
3. Tighten the joint bolt securely using the
hex wrench.
Before assembling, make sure you have all
the components required for a complete
unit. This machine consists of the follow-
ing components and accessories. Carefully
inspect all components for damage. If you
find any damage or missing items, ask your
Shindaiwa dealer for consultation.
Prior to Assembly
T242
Engine Assembly Outer Tube Assembly
Safety Guard
Handle Strap Blade Cover
Sub Guard
Barrier
C242
Engine Assembly Outer Tube Assembly
Safety Guard Handle Shoulder Harness Blade Cover
Sub Guard
Tool Set
Bolt
Hex Wrench (M5)
Plug Wrench
Upper Clamp
Spacer
Scraper
Protector
Clamp must fit
next to line on
outer tube decal
Decal
Clamp
C242
Figure 5D
Tool Set
Bolt
Hex Wrench (M5)
Plug Wrench
Upper Clamp
Spacer
Scraper
6