Shinano Kenshi PTP 1, User Manual

Page: 78 / 162

79
called "Recommended SD cards" in Appendix A, or contact your
PLEXTALK dealer for advice.
You can erase a SD card in PLEXTALK or in a PC if you have a
suitable card reader.
Caution: Whenever you erase a SD card using a PC, make sure you
select "FAT-16" or “FAT-32”.
16.3. Inserting a blank SD card.
In order to start any recording, you will need to insert a suitable SD
card into PLEXTALK. In Section 6.9, you saw how to insert and eject
SD cards in general terms. This section details how PLEXTALK
behaves when a blank SD card is inserted ready for recording.
Assuming that no SD card is in PLEXTALK, and that there is no
external source connected to the microphone or line in sockets,
PLEXTALK will behave in the ways detailed below.
16.3.1. Inserting blank SD cards.
When you insert a blank SD card, the following happens:

PLEXTALK will say "SD card. Title does not exist. Press
Record key to create DAISY title". This indicates that
PLEXTALK will only permit the recording of a DAISY title on a
SD card.

Now press the Record key.

PLEXTALK will say "Creating DAISY title" and will then
proceed to create the DAISY title on the SD card.

When complete, PLEXTALK will say "Finished. Press Record
key, record to card. Level monitor auto". PLEXTALK will then
say "Auto" repeatedly.

This indicates that the DAISY title has been created on the SD
card and that PLEXTALK has automatically gone into the