141
Symptom: CD will not play.
Possible cause 1: The CD has been inserted upside down.
Solution: Eject the CD and reinsert it with the label side upwards.
Possible cause 2: Writing failed while in progress.
Solution: Use the "Search for edited information in the disc" feature
to try to recover recording data. For further detail refer to Section
17.8.2.
Possible cause 3: The CD is blank.
Solution: Make your recording and then play it back or eject the CD
and use a different CD.
Symptom: CDs or cards cannot be recorded on.
Possible cause: Fault with the input.
Solution: Check the input source and then correct the input setting.
Symptom: The recording level cannot be adjusted.
Possible cause: You are recording using the built in microphone.
Solution: Change the input source by connecting to the External
Microphone or the Line In socket.
Symptom: PLEXTALK is not recognized as a CD-R or CD-RW drive
on the PC.
Possible cause: The operating system is Windows 98SE, and the
driver is not installed.
Solution: Install the driver. Refer to Section 21.4.2 for detailed
instructions on how to do this.
Symptom: The same CD location is repeatedly played.
Possible cause: A repeat play mode has been selected.
Solution: Switch to "Standard play" mode in the "Playing settings"
menu. In Book Creator mode you can also do this by pressing the
Number 3 Key.
Symptom: There is no voice guidance.
Possible cause 1: The guide volume has been set to '0'.
Solution: Increase the guide volume so that the guide speech can be
heard.
Summary of Contents for PTP 1
Page 1: ...2 PTP 1 User s Guide 2008 Shinano Kenshi Co Ltd...
Page 159: ...160 Index...
