Shinano Kenshi PTP 1, User Manual, Page: 25 / 162

26

When you inserting the battery, make sure the direction of its
terminal is correct
6.5. Connecting the PLEXTALK to the mains for
charging.
In order to charge the internal battery, you need to connect
PLEXTALK to the mains supply as follows:

Place PLEXTALK face up as normal operation position

Plug power adopter into connection which is located left side of
the bottom side face
6.6. Turning PLEXTALK on and off.
To turn on or off, press and hold power key

Press and hold power key to turn on. (Hold key 0.5 seconds or
longer)

When power is on, you will hear musical tones that indicate
that the unit is powering up with illuminating LED in orange.

A different musical sound indicates ready to use with
illuminating LED in green.

Press and hold power key again to turn off (hold key 1.5
seconds or longer):

The unit will beep and then announce that it is shutting down
with flashing the power LED.

Musical tones will indicate that the unit is busy and, after a
short while, a different musical sound indicates that
PLEXTALK has completed the shut down process.
Note:

Booting up process should require approximately 20 seconds
in case of first use or after battery replacement.

When you turn off the power, if you hold the key too short time,
the sleeping timer will start of its functioning. When you turn
off the power, make sure you hold the key over 1.5 seconds