30m
5.Before putting the Electric Pump into water, please carry out a test running for no more
than 10 seconds and simultaneously check whether the rotational director of the pump shaft is the
same as that indicated by the indicating arrow in the nameplate.
6.Connect a delivery pipe (whose specifications are selected based on Table 1) matching
with the discharge chamber. For example, tighten a soft delivery pipe with the iron wire or a clamp
or reliably connect a steel-type delivery pipe with the screwed joint, and then tie a rope to the
delivery chamber for the purpose of lifting and placing.
7.Do not strike or press the cable or use it as a lifting rope. When the Electric Pump is
operating, do not arbitrarily pull the cable, so as to prevent the cable from being damaged and
causing any electric shock accident. Upon installation, bind the cable to the delivery pipe or take
other proper measures for protection, so as to avoid any tensile deformation due to the great
dead-weight of the cable.
8.When the Electric Pump is submerged in water, its depth shall not exceed 70m (20m for
QJD series) and shall be at least 3m away from water bottom and it shall not be caught in sludge.
Simultaneously keep the mesh enclosure or the impeller from being blocked by water plants or
sundries, for such blocking may result in the Electric Pump's failure to operate normally. During
operation, please frequently check the water level and make sure that there is enough water to
cover Electric Pump
.
9.Please arrange a safety warning sign on the site where the Electric Pump is operating,
which reads “DANGER: ELECTRIC SHOCK RISK AND NO ENTRY FOR PEOPLE OR ANIMAL”,
so as to prevent any accident.
DANGER: ELECTRIC SHOCK
RISK AND NO ENTRY FOR
PEOPLE OR ANIMAL
10.Oil-filled electric pumps shall not be filled with any liquid medium other than No. 10
mechanical oil. dry-type structure QJD series shall not be filled with any liquid medium.
