Shimano SM-PCE02, Help Manual

Page: 5 / 34

ABOUT E-TUBE PROJECT
5 / 34
The main functions are as follows.
When using SM-PCE1 / SM-PCE02
Functions Details
Connection check
The function is to check that each unit is connected correctly and is recognized by PC.
Customize
This function allows you to customize the global functions and operations of
the system to suit your needs.
Error check When a single unit or multiple units are connected, this function checks
their operation and identifies any units which have a problem.
However, this does not mean that all such problems can be discovered. In
addition, the function does not fix any problems which are discovered.
Update firmware
This function is used to update the firmware for each unit.
(The firmware is downloaded via the Internet.
）
Preset
This function allows you to connect one or more units and read or write all the
settings of those units at a time. The readout settings can be saved in a file.
The settings can also be successively written to multiple bicycles.
Unit log acquisition
(only for E-BIKE
category) Acquires various kinds of data from the units and display it in a report
format. In the report, you can check the settings of each unit and the
battery status.
Complete Setup
Disconnect the unit from the computer. The unit may not operate properly
before this operation is completed. Even when E-TUBE PROJECT is exited,
the connection to the PC is disconnected.
When using SM-BCR2
Functions Details
Connection check
The function is to check that each unit is connected correctly and is
recognized by PC.
Customize
This function allows you to customize the global functions and operations of
the system to suit your needs.
Update firmware
This function is used to update the firmware for each unit.
(The firmware is downloaded via the Internet.
）
Preset This function allows you to connect one or more units and read or write all the
settings of those units at a time. The readout settings can be saved in a file.
The settings can also be successively written to multiple bicycles.
Complete Setup
Disconnect the unit from the computer. The unit may not operate properly
before this operation is completed. Even when E-TUBE PROJECT is exited,
the connection to the PC is disconnected.