![Shimano SG-8C20 Service Manual Download Page 23](http://html1.mh-extra.com/html/shimano/sg-8c20/sg-8c20_service-manual_1257202023.webp)
23
7.
Install the lock washer.
NOTE:
If either the lock washer or driver
plate rotates during this step,
return to assembly step 5 and
make sure that the cone is cor-
rectly seated.
9
. Install the right hand locknut
with a 17mm hub spanner.
10.
Reverse the axle unit in the
vice to complete assembly.
8.
When installing the stop
washer, align the two teeth
with the two grooves of the
lock washer.
Right hand locknut
(Y-33Z 07020)
(Y-041020800)
Lock washer
(Y-34R 98090)
Stop washer
(Y-34R 09000)
Tightening torque:
25 - 30 N·m {218 - 261 in.lbs}
Lay_INTER-8_GB 05 23.12.qxd 23.12.2004 13:40 Uhr Seite 23