Shimadzu IRAffinity-1, Instruction Manual

Page: 10 / 134

viii
IRAffinity-1
Precautions for Instrument Inspection, Maintenance, Adjustment and Care
In an Emergency
During a Power Outage
WARNING
• Unplug the instrument before inspection, maintenance, or parts replacement.
Otherwise, electrical shock or short-circuit accidents could occur.
• Never remove the main cover.
This may cause injury or malfunction of the instrument or hazardous radiation exposure.
The main cover does not need to be removed for routine maintenance, inspection and adjustment. Have
your Shimadzu representative perform any repairs requiring removal of the main cover.
• Replace fuses only with fuses specified in this manual.
Any other fuses could cause a fire.
Contact your Shimadzu representative for information about fuses not described in this manual.
• If the power cord plug gets dusty, remove the plug from the power outlet and wipe away the dust
with a dry cloth.
If dust is allowed to accumulate, fire could result.
• Replacement parts must be of the specifications given in this manual.
Use of any other parts may result in instrument damage and malfunction.
• If any water gets onto the instrument, wipe it away immediately to prevent rust. Never use
alcohol or thinner solvents for cleaning the instrument.
They could cause discoloration.
• Dispose of the waste liquid properly and in accordance with the instruction by your
administrative department.
• Performance of procedures other than those specified herein may result in hazardous radiation
exposure.
WARNING
Unplug the power cord of IRAffinity-1 instead of turning off the power switch on the front panel, if
IRAffinity-1 must be completely turned off in case of rising smoke, etc.
NOTE
When AC power cannot be supplied because of the periodic inspection of utilities etc., the Dry unit
does not desiccate. Replace Silica gel packages in the FTIR once a week during brownout.