Shibaura FT450-A, Owner'S Manual

Page: 19 / 44

16
4. Handling of pump (Operating method)
(3) Position of throttle lever.
Set the throttle lever (2) to “START”.
(4) Turn the main switch (3) clockwise all
the way to starting motor, thereby starts the
engine.
○
After starting, select “RUNNING 2”.
○
Running at “RUNNING 2” charges the
battery via the charger circuit built in the
fire pump.
※
In case of running without the battery.
○
Select “RUNNING 1”.
○
In case of running at “RUNNING 2”, meter
lamp burnout, etc. may occur.
(5) Use of recoil starter.
○
Strongly pull the recoil starter
handle.
○
When starting by the recoil starter rope, take care so that clothing or glove will
not be caught.

There is a fear of injury.
○
Before starting by the recoil starter rope, keep persons at least 2 m away.

There is a fear of injury by hitting via elbow or rope.
○
During the run, the recoil starter must be closed.

There is a fear of being caught by the pulley or belt or suffering from a trauma.
Caution
Caution
Warning