PTO BELT
Front-PTO and Side-PTO shafts are driven by
the V-belts.
If the PTO belts are slipping, check the PTO
belts for wear or damages and adjust the belt
tension.
WARNING: NEVER ENGAGE THE STARTING
MOTOR, WHEN CHECKING THE PTO
BELTS.
To check the PTO belts:
1. Remove the under-seat cover
A
.
2. Check the Front-PTO driven belts
B
, and
side-PTO driven belts
C
for wear or
damages.
3. Remove the Side-PTO cover
D
.
4. Check the Side-PTO driven belts
E
.
3-19
3-18
LUBRICATION AND MAINTENANCE
A
1. Under-Seat Cover
D
4. Side-PTO Cover
B
C
FRONT, SIDE-PTO DRIVEN BELTS
2. Front-PTO driven Belts
3. Side-PTO driven Belts
E
5. Side-PTO Driven Belts
LUBRICATION AND MAINTENANCE
FUSE BLOCK
The fuse block is located on the left side of the
mower compartment. Always replace blown
fuses with the size specified for that circuit.
FUSIBLE LINK
A fusible link wire
A
is used to protect the
mower's entire electrical system. If too much
amperage passes through this wire it will melt
down so that it will no longer allow current to
pass (similar to the way a fuse works). The
fusible link wire is a red wire that goes from the
starter terminal to a connector that links into
the main wiring harness.
To replace the fusible link wire:
1. Disconnect the negative battery cable from
the battery.
2. Unplug the connector linking the wire to the
main wiring harness.
3. Remove the old fusible link wire from the
starter terminal.
4. Replace the old fusible link wire with a new
one - first attaching to starter terminal, and
then connecting into the main wire harness.
IMPORTANT: Always replace the fusible link
wire with the appropriate fusible link wire for
this tractor (part # SBA 385603370).
INSTRUMENT LIGHTS
To change a burned out instrument bulb:
1. Remove lower cover.
2. Remove 4 screws from the dashboard.
3. Remove the front cover of the dashboard.
4. Turn the bulb together with the socket half a
turn counterclockwise and pull it out.
5. Replace the bulb with new one and return
the valve and socket to the original place.
Indicator Bulb Type
(Q’ty 4) JIS T6.4 14V 3W (SBA 385470301)
(Q’ty 1) JIS T5 13.5V 2W (SBA 385470302)
FUSE BLOCK
A
ELECTRICAL SYSTEM PROTECTION
1. Fusible Link
INSTRUMENT PANEL AND WARNING LIGHTS
Bulbs
