15
Fig.9A Fig.9B
6.4 HEIGHT ADJUSTMENT INSTRUCTIONS
CAUTION:
Do not at any time make any adjustment to scarifier without first stopping the engine.
Your scarifier is equipped with a depth adjustment lever offering 5 working heights. They are: -3mm, -6mm,
-9mm, -12mm and -15mm.
Stop the engine before changing scarifier cutting height.
1. Make sure the engagement lever is pulled back.
2. To change the height of cut by turn the front knob clockwise rotation (higher)
(Fig.10A)
or
anticlockwise
rotation
(lower) to selected height
(Fig.10B)
.
3. Move engagement lever into its forward position to set your working height.
Fig.10A Fig.10B
Fig. 10C
7. REPLACEMENT OF THE ROLLER
WARNING:
Be sure to wear work gloves.
Caution:
use only original scarifier/aerator shafts approved by the manufacturer.
The equipment can be assembled with the scarifying roller or the aerator roller.
Only replace the roller with an original
Sherpa
roller, as this will ensure top performance and safety under all
conditions.
Blade UP
Blade Down
