13
Fig. 6
6. OPERATING INSTRUCTIONS
Service the engine with petrol and oil as instructed in the separate engine manual packed in your scarifier.
Read instructions carefully.
WARNING!
Petrol is highly flammable.
Store fuel in containers specifically designed for this purpose.
Refuel outdoors only, before starting the engine and do not smoke while refueling or handling fuel.
Never remove the cap of the fuel tank or add petrol while the engine is running or when the engine is hot.
If petrol is spilled, do not attempt to start the engine but move the machine away from the area of spillage and
avoid creating any source of ignition until petrol vapors have dissipated.
Replace all fuel tanks and container caps securely.
Before tipping the scarifier to maintain the blade or drain oil, remove fuel from tank.
WARNING:
Never fill fuel tank indoors, with engine running or for 15 minutes after the engine has
stopped running – the engine must be cool before any fuel is added.
6.1 TO START ENGINE
1. Before starting engine, please turn the engine switch to the “ON” position. (Fig.7A)
3. To start a cold engine, move the fuel tap to the
“on”
position (Fig. 7B). Move the choke lever to the
“on”
position (Fig. 7B).
4. Standing behind the unit, grasp the brake control handle and hold it against the Lower handle. (Fig. 7C)
5. Keep hold the brake lever as shown Fig.7C and Grasp the starter handle as shown Fig 7D pull up rapidly.
Return it slowly to the rope guide bolt after engine starts.
6. Move the choke lever to the “off” position. (Fig.7E)
Note!
When the cutter deck is in contact with the ground, the unit can move.
