11
5. ASSEMBLY
5.1 FOLDING HANDLE
1. Fix the lower handlebar into the unit body with bolts, washers and locking knobs. (Fig. 2A/Fig.2B/Fig.2C)
2. Connect the lower handlebar and upper handlebar with bolts, washers and locking knobs.
(Fig.2D/Fig.2E/Fig.2F)
3. Attach the cable-clamps to the position shown and then attach the cable. (Fig.2G)
Fig.2A Fig.2B Fig.2C
Fig.2D
Fig.2E Fig.2F
Fig.2G
5.2 ADJUSTMENT FOR AN APPROPRIATE ANGLE
1. Loosen the locking knobs which fix the lower handle in place. (Fig.3A)
2. Move the lower handle up or down, adjust it to the proper height – There are 2 options for handle height.
3. Once adjusted to the desire height, fix the lower handle into place using the locking knobs.
WARNING:
The left side and right side of lower handle must adjust to the same height.
Bolt
Washer
Locking knob
Bolt
Washer
Locking knob
Cable Clamp
