Sherpa SPB-500, Safety & Operating Instructions Manual, Page: 9 / 14

SPB-500 Safety & Operating Instructions
Sherpa Tools | SPB-500 | 2018
7
Step 3 : Simply lift the brake slightly to de-activate the brake stopper ( Figure 21 ).
Starting the Wheelbarrow
Switch on the power by pressing the power button. A red LED light lights up and indicates that
you are ready to go ( Figure 22 ). Activate the speed control by lifting the bar ( Figure 23 ). The
speed control is a variable type, which means the higher you lift the bar, the faster it will travel.
Remember to switch off the power after each use. An explanation of label on the switch is
explained in Figure 24 .
Figure 21
Operating the Wheelbarrow
Figure 22
Figure 23
Figure 24
Indication of
speed control