background image

 

10 

17. GUARANTEE 

Guarantee granted for a period of 12 months for business entities or consumers for 24 months from the date of sale. 

The guarantee will be respected by the advertiser after the presentation of proof of purchase (invoice or receipt) and warranty card inscribed 
with the product name, serial number, date of sale and point of sale bearing the stamp.

In the case of warranty repair advertised the device should be sent to the company TECWELD shipping company GLS. Shipments sent at the 
expense of TECWELD through other shipping companies will not be accepted !!

The device transmitted to the complaint must be packed in the original carton, and protected by Styrofoam original fittings. TECWELD 
company is not liable for damage caused by a welder during transport.

If you wish to discard this product, do not throw it with general household waste. According to the 
WEEE Directive (Directive 2002/96 / EC) in force in the European Union for used electrical and 
electronic equipment must be used methods of utilization.

In Poland, in accordance with the provisions of the Act of July 1, 2005. Waste electrical and 
electronic equipment is prohibited to place together with other wastes of used equipment marked 
with crossed out wheeled bin symbol.

The user who wishes to discard this product, it is obliged to return waste electrical and electronic equipment to a used equipment collection 
point. Collection points are conducted, among others, by wholesalers and retailers of equipment and the municipal organizational units engaged 
in waste collection.

These legal obligations have been introduced to reduce the amount of waste generated from waste electrical and electronic equipment and to 
ensure an adequate level of collection, recovery and recycling of used equipment. Proper implementation of these duties is important especially 
when the waste equipment contains hazardous components which have a particularly negative impact on the environment and human health.

Equipment weight 7.18 kg

TECWELD Peter Polak 
41-943 Piekary Slaskie Street. Emerald 21/3/6

branch: 
41-909 Bytom ul. Cross 3
Tel. (+48 32) 38-69-428, fax (+48 32) 38-69-434 e-mail: 
[email protected] www.tecweld.pl

Summary of Contents for MMA 200












Reviews: