Tip:
if you travel for long distances or there is no power source around, you can use a powerbank
to charge Sherlock without removing it from the handlebar.
5
CHARGING THE DEVICE
You will be notified when the battery is fully
charged. It takes approximately
2 hours to fully
charge
the device.
The battery lasts
2 weeks on average in standby
mode.
You will be notified when the battery is
almost out of power.
2
Insert the male plug in the MicroUSB port
1
Remove the cap
3
Connect the provided MicroUSB cable to a power source
Note:
make sure the Charge LED turns on!
Handbook ENG.indd 5
17/07/2017 18:32
