8
INSTALLATION
WARNING!
If the device does not fit, it may be a non-compatible handlebar. Never use a tool like a hammer to
force Sherlock in. If the hexagonal head slips inside the handlebar, it means that your handlebar is
not compatible. For more info, check the compatibility document on
www.sherlock.bike.
Insert the protective cap on the head.
4
Do the hardware test to verify signal reception.
3
Insert the twin cap at the other end of the handlebar.
5
Push Sherlock slowly into the handlebar with the USB port
aligned to handlebar bending direction, if present.
The head of the device must meet the handlbar edge.
2
Remove caps, handles or anything that obstructs the bar end.
1
Handbook ENG.indd 8
17/07/2017 18:32
