background image

Sherex Fastening Solutions, LLC ~ 400 Riverwalk Pkwy, Suite 600 Tonawanda, NY, 14150  

866-4SHEREX ~ www.sherex.com  

 

Instructions for Use: 

1.  Insert head set into tool as described on page 2. 

 

2.  Turn the rivet nut onto the cap screw — 1 complete turn. 

 

3.  Insert the rivet nut into the work piece. 

 

4.  To install the rivet nut, depress the 

Position 1 Button

. While the button is depressed, 

squeeze the 

Position 2 Lever

. When the rivet nut is completely installed the tool will stall. 

 

5.  Once the tool stalls, release the 

Position 1 Button, 

but continue to hold the 

Position 2 Lev-

er

. The tool will reverse out of the work piece leaving the rivet nut completely installed. 

 
The SSG 910 Series provides a quick and easy way of installing rivet nuts. This tool uses torque 
to install rivet nuts so it does not need any adjustment, it is already set for the rivet nut.  

If necessary, minor adjustments can be made by increasing or decreasing air pressure. 

  

 
This tool is recommended for use with Sherex CAL, CAK, CAH, CAO, CPB, CFT/CAT, and 
CFW/CAW rivet nuts. Feel free to contact Sherex about special applications, or use with other 
rivet nut styles not listed above. 

SSG-913 Dimensions 

 

Keep 

Threads  

Lubricated! 

Position 2 

Lever 

Position 1 Button 

2.60 

4.0 

7.50 

19.10 

Dimensions shown in 

bold

 are in inches. 

The other dimensions are in centimeters. 

1.37 

3.50 

Sherex Spin/Spin Inline Right Angle Rivet Nut Tool 

Summary of Contents for SSG-913








Reviews: