SHEREX® ~ 400 Riverwalk Pkwy, Suite 600 Tonawanda, NY, 14150 ~ 866-4SHEREX ~ www.sherex.com
3
T
OOL OVERVIEW
The FLEX-5P tool is designed for installing Sherex threaded insert/rivet nuts. The tool utilizes a pull to
pressure installation method. The advantage with this method is that the same insert can be installed
into different material thicknesses (within the part grip range) without any adjustments to the tool once
the proper pulling pressure has been set. Contact Sherex for the conversion instructions for changing
this tool to a pull to stroke (FLEX-5S) installation method.
The tool is designed to install rivet nuts from M3 to M10 & #4-40 to 3/8-24. The recommended
operating air pressure is between 5 - 7 bar (72.5 - 101.5 PSI).
