LVP919 SERIES USER MANUAL
Chapter 6 User Setup Menu Instructions
22
1
.
Output image
After the system start, press
Setup
to enter the user setting menu. Select 1.output image through
↑
,
↓
under this menu. Press the knob button (
OK
) to enter the following diagram1.output image menu.
This menu can set the output resolution and output image mosaic.
1. Output Image
--------------------------------------
1.1 Resolution
1920x1080_60Hz
1.2 Fast Mosaic1
＞＞
1.3 Fast Mosaic2
＞＞
1.4 Manual Mosaic
＞＞
P
ic
6-1a LCD display interface
1
）
Change the output resolution
Operation method:
Press
↑
or
↓
button to select 1.1 resolution. Turn the knob button to select the right parameter.
Press
OK
button. The confirmation menu appears as below. Press
OK
button again to restart the device.
The changed parameters will be effective.
Tips
--------------------------------------
Data will reset
Press <OK> to reset
Press<Return> to cancel
--------------------------------------
P
ic
6-1b LCD display interface
