LVP919 SERIES USER MANUAL
Chapter 5 Instructions of Basic Operations For Users
17
2
.
Operations on PIP mode
It is permitted to insert a PIP window on LVP919, this PIP input signal can be any non-grouped input
signals (grouped input signals are as follows on page 18). The position and size of these dual image can
be set into 4 modes. The detailed operations are as follows:
Enter the dual picture display mode
：
press
PIP
button and the indicator is on, enter the dual
picture display mode, then you can press buttons to select the PIP input signal. The LCD screen will
show you what the main input signal and PIP input signal is and the position and size of the
corresponding image.
（
As follows
）
Main Input
：
HDMI1
Main In Status
：
1080p_60Hz
PIP Input
：
V1
PIP In Status
：
PAL
--------------------------------------
Main Pos.&Size
：
（
0, 0, 1920,540
）
PIP Pos.&Size
：
（
0, 540,1920,540
）
PIP Mode
：
M1
Pic 5-2a LCD display interface
Change the PIP input
：
press the corresponding button to select a input signal and this selected
input signal is the PIP input.
Change the main input
：
press those buttons to select the main input signal after pressing PIP
button and close PIP mode. Then press PIP button and select the PIP input signal.
Switching PIP mode
：
when dual picture mode is on, you can knob to switch the PIP mode, and
press
OK
to switch to the pointed display mode.
