EN
04
FAQ-2
FAQ-1
FAQ-3
1). Turn on the device and wait 30 seconds, the camera will generate a WiFi hotspot:
Camera WiFi SSID:
IPC _ ******, WiFi Password: 12345678
2). Go to your phone's WLAN settings and connect your phone to the camera's WiFi hotspot
.
FAQ1: How to add camera to app via WiFi Hotspot
Enter Password
Password
Sricam office
Settings
Cancel
Join
CHOOSE A NETWORK
Wi-Fi
Wi-Fi
12345678
TP-LINK_AFCG
Paladin Tek-2.4G-BRTV
Boss
Sricam office
IPC_*******
Sricam office123
Settings
CHOOSE A NETWORK
Wi-Fi
Wi-Fi
TP-LINK_AFCG
Paladin Tek-2.4G-BRTV
Boss
This WLAN network has no Internet
access. Connect anyway?
IPC_*******
Notice: Before using the WiFi hotspot to add the device in the app, you need to turn off the
3G / 4G / LTE mobile data of the smarphone first.
Step 1: Connect your phone to the camera's WiFi hotspot
Note: Enter WiFi
Password:12345678
CANCEL
CONNECT
Note: If the camera's WiFi hotspot is not found in the phone's AVAILABLE NETWORKS list,
please reset to factory settings and try again.
