EN
02
1. Turn on the camera
The camera will emit a continuous “beep” after 30 seconds.
Note: If there is no “beep” sound,
keep holding the “RESET” button for 5 seconds until you hear a long “Beep”
Next
Input the device’s ID
H00***********
3-2
3-1
Device
Add
2. Add the camera to the APP
When you hear the continuous “beep”, follow the instructions of the SriHome APP to add the
device, as in the figure:
3-3
2
Next
Input the device’s ID
Note: Only some models support 5G WiFi
Connect your phone to WiFi
Input Wi-Fi password
H00***********
office-wifi-2.4G
***********
WiFi QR Connect
3
Power
RESET
1
RESET