background image

                                                                                                                              Operation  instruction 

 

2

 

Notice

 

The information  in  this  document is  subject  to  change without notice. Every effort has 

been made in the preparation of this document to ensure accuracy of the contents, but all 
statements,  information,  and  recommendations  in  this  document  do  not  constitute  the 
warranty of any kind, express or implied.     

 
 
 

Features 

1)Extends HDMI with multi-channel digital audio, IR and RS232 up to 330 feet (100 

meters) 

2)Supports resolutions up to Ultra HD 4K x 2K (3840 x 2160 @ 30 Hz) and 1080P Full HD 
3)5Play

TM

 convergence: uncompressed high definition Video and Audio, LAN serving, 

Power over Ethernet and USB/RS-232/IR controls 

4)Supports LPCM 7.1 audio, Dolby® TrueHD, Dolby Digital® Plus, and DTS-HD® 

Master Audio™ pass-through 

5)Supports 48bit Deep Color 
6)Supports Bi-directional IR control.   
7)CEC pass-through 
8)Supports HDCP 

 
 
Package Contents 

1)

 

1xHDBaseT Transmitter 

2)

 

1xHDBaseT Receiver 

3)

 

2xIR-TX cable (no need IR-RX cable) 

4)

 

1x48V/1.25A DC Adaptor 

5)

 

1xUser Manual 

6)

 

1xRS232/Female to 3.5 mm audio jack adapter 

7)

 

1xRS232/Male to 3.5 mm audio jack adapter 

8)

 

1x Pair wall/rack mounts 

 
 

Summary of Contents for LM-EHU100










Reviews: