25
disconnect the connection between the testing leads and
the circuit under test and remove testing leads from the
input terminals.
Temperature Measurement
(KJ2817B only)
To measure temperature, connect the Meter as follows:
·
Set the rotary switch to
°C
range
and the display is ambient
temperature
.
·
Connect the RED lead and BLACK lead of temperature
probe (k type) into “V
Ω
CAP C” and “COM” input terminal
respectively.
·
Put the sensor end of the temperature probe into the area
want to measured.
·
Read the value from display.
Warning
a) Do not apply any voltage to the input when the Meter is
working in temperature measuring mode.
b) The limit temperature of attached temperature probe is
250
℃
max., please use correct probe for other bigger
range.
c) When the measurement has been completed, remove
the temperature probe.
Beeper
