EIA2000 VOIP gateway USER MANUAL
EIA2000 VOIP gateway USER MANUAL
16
Commonly, EIA have configured basic data , modifying
original data is needed. The first step is gaining original data.
Find and click “tool/gaining EIA data in device” from menu. Then
modify it.
1
、
Start configuration from default data.
Click “resume default data” item in “tool”menu or
“resume default data” swift key in tool
column .Then get the fault configuration data.
After configuration,click“appliance configuration to EIA”
item in “tool” menu or “appliance configuration to EIA” swift key
in tool column. EIA configuration information will be setup to
current EIA device .
2
、
Get the original data from EIA device and configure
them.
To configured data, it is better to save it. It can be used at
when EIA is replaced or maintained, click “save file” item in “tool”
menu or “save file” swift key in tool column. EIA configuration
information will be saved to corresponding file. The postfix of file
is “Idf”. Suggest user save every EIA's configuration to
corresponding file. For easy to lookup , name file as “A company
(00-02-02-00-10-00).Idf”.00-02-02-00-10-00 means MAC
address of EIA device (the sign of each EIA device in calling
control center is different), User can get the MAC on the panel of
EIA device .
Click “get EIA configuration from device”in “tool”
menu or “get EIA configuration from device” swift
key in tool menu .Will get running configuation data
EIA device.
3
、
Load previous saved data file and configure it to
EIA device
Click “gain EIA configuration from file” item in “tool”
menu or “gain EIA configuration from file” swift key in
tool column. User can choose previous data file.
Thus , configuration finished.data have been written to EIA
device, the work of T1000 is over. Attention, T1000 is only
configuration tool, not driver program. It will not be used during
the douse of device running normally.
The main function of T1000 terminal is configuring
information of “local link” and “calling control center” for EIA
device.
3.2
EIA device configuring data method
If user has more knowledge in the aspect of IP .he can
choose advanced item through configuration for some special
application occasion
There are three methods to configure data after T1000
terminal connected EIA device:
15