EIA2000 VOIP gateway USER MANUAL
8
、
If the Internet port is normal. Maybe the data configuration of
this EIA is not set in calling control center, Consult
technician of Allywll co,. ltd. or his distributor.
There are two (or more than two ) EIA device in LAN ,
one can communicate ,the other can’t communicate
normally.
Settlement:
1
、
According to previous item, rule out the possibility that EIA
IP address is not conflict with other device.
2
、
If enterprise use Router or IP sharer building LAN , and the
NAT of current products have faultiness, so it will lead to
several EIA can’t penetrate NAT. take following method
modify configuration data .
3
、
Using T1000 figure configuration terminal and load two
saved configuration data file of EIA. Open advanced
selection. See “RTP start port”, “local MGCP port” of two
EIA devices are the same.
4
、
If exit same data, take the configuration method in chapter
three and modify them.
5
、
If the data is normal, consult technician of Allywll co,.ltd. or
his distributor.
29