ShenPaz Sintra PRO 120zrf, User Manual, Page: 21 / 44

Ver
3
-01/08/2020
21
With fast cooling:
While this option is activated (check box in selected) two additional rows will open
below the screen to select the opening parameters.
Those parameters will temper the opening of the lift according to temperature
distance and time.
Figure 10– fast cooling/ programming parameters
a)
Initial open step will be the first opening temperature and the distance of the first
step and the holding time following this first movement.
b)
Additional open step will define how long following the step will be holding after
the second opening distance.
This programmable step loop will be operating until the door will be fully open.
Note: the fast opening will take place instead of the original cooling of the cycle.
or in combination.
FAST COOLING meaning: Activation of an internal cooling system that shortens the overall full
sintering cycle. This function is preset in the relevant programs in
SINTRA PRO 90 Zr/
SINTRA PRO 120 Zrf
partially in some program according to the preset, the lift will open
according to the fast opening preset parameters, note that those cycle are performed without
tray , (the tray will explode in a fast cooling ).
TIP: When using fast cycle do not use the tray. The tray will undergo thermal shock
and explode under fast cooling. Instead place the restoration only on the lid.