Ver
3
-01/08/2020
15
5.
Start a sintering program
1.
Place your restoration into the tray on the table of the furnace.
2.
Choose or create the relevant program.
3.
Action one of the 3 options of programming, edit the program or checks the program.
On the Graph screen press
to start the program.
From this point, you will be able to follow the cycle on the graph screen and see the remaining
time of the cycle.
TIP:
Insufficient sintering results may be due to faulty temperature control or bad programing!
▷
Check the thermocouple for damage.
By pressing the Flame icon on the right top corner of the graph screen while the cycle is
running you may switch screen view between the parameters and the Graph screen.
Summary of Contents for Sintra PRO 120zrf
Page 1: ...Ver 3 01 08 2020 1...