Shenchen Peristaltic Pump
V6-12L Series
- 8 -
Click
Setting
button in the main interface, then click
Communication
button to
enter Communications Settings interface.
This pump support MODBUS--RTU Mode. Please select baud rates and
communication interface (RS485/RS232). Click
Slave No.
button to enter peristaltic
pump address No.(range:1-32 ), select communication enable is
ON
. Then this
pump can be communication with master, receiving master signal.
NOTE
: Peristaltic pump only under communication control when in the main
interface, it’s out of communication control when in other interface.
8
、
Flow Rate Calibration Interface:
Flow Rate Calibration Interface as below
:
The top left corner display the function, when fixed volume measurement turn
on, display fixed volume; when fixed time and volume turn on, display fixed