shelolab SLFHP522-H Installation And Operation Manual Download Page 3

Page: 3 / 44

P a g e

SMO5HP-2 High-Performance Oven

220 – 240 Voltage
Part Number (Manual): 4861706
Revision: June 23, 2020

Model

SMO5HP-2

Part ID

SLFHP522-H

The Part ID denotes the build type of the model. The manufacturer periodically releases

new build type designs incorporating new features and refinements of existing ones.

SHEL LAB is a brand of Sheldon Manufacturing, INC, an ISO 9001

certified manufacturer.

Safety Certifications

These units are CUE listed by TÜV SÜD as forced air ovens for professional, industrial, or

educational use where the preparation or testing of materials is done at an ambient air pressure

range of 22.14 – 31.3 inHg (75 – 106 kPa) and no flammable, volatile, or combustible materials are

being heated.

The units have been tested to the following requirements:

CAN/CSA-22.2 No. 61010-1:2012
CAN/CSA-C22.2 No. 61010-2-010:2015
UL 61010-1:2012
UL 61010-2-010:2015
EN 61010-1:2010
EN 61010-2-010:2014

Summary of Contents for SLFHP522-H













































Search results

Summary of Contents for SLFHP522-H

Reviews:

Related manuals for SLFHP522-H

Brands by name

Popular brands

shelolab SLFHP522-H, Installation And Operation Manual

Search results

Summary of Contents for SLFHP522-H

Reviews:

Related manuals for SLFHP522-H

Brands by name

Popular brands