shelolab SLFHP522-H, Installation And Operation Manual

Page: 27 / 44

27 | P a g e
OPERATION
S
ET THE
H
IGH
-T
EMPERATURE
L
IMIT
Note: Test the high limit system once per year for functionality.
The high-temperature limit is set by the end-user, typically at 10 ° C above the highest temperature
the oven will run during your recipe program or constant-temperature application.
End of Procedure
1.
Advance to the Limit High Setpoint, starting on the homepage
Push Advance
multiple times
•
Push the Advance button repeatedly until “Lh.S1”
(Limit High Setpoint) shows in the green mid-
level display line.
2.
Adjust the high limit to at least 10°C above the highest temperature of your application
Adjust
•
The oven will automatically save and apply the
new High Limit setting after you have stopped
adjusting.
Note : If you are just checking the current high-
temperature limit setting, push the Reset button to
exit the Limit High Setpoint menu and return to the
homepage without saving any changes.
3.
Return to the Homepage
Push Reset
•
Returned to the homepage.