AFTER SALES SUPPORT
Distributed By Prolink Brands Ltd
Email: [email protected] P.O Box 132 398 Sylvia Park
Phone: 0508 776 546
Auckland 1644, New Zealand
Page 9
CLEANING and MAINTENANCE
This appliance requires little maintenance. It contains no user-serviceable parts. Any
servicing requiring disassembly other than cleaning must be performed by a qualified
appliance repair technician.
CAUTION:
To prevent damage to the appliance do not use alkaline cleaning agents
when cleaning, use a soft cloth and a mild detergent.
Before Cleaning
•
When not in use or before cleaning, always disconnect the appliance from the
mains supply and allow the Appliance to cool down before cleaning.
Care and Cleaning
•
Regularly clean the outside of the appliance with a soft damp cloth and dry it with
a dry towel. Do not immerse in water. Do not use harsh solvents to clean the
plastic.
•
Do not use any metal tool, abrasive scouring pad, steel wool or other hard
cleaning product to clean the surface of the cooking plates, as they may scratch
the non-stick surface.
•
Clean the inner liner, ice collecting tray, water box, ice shovel and evaporator
frequently. Use a diluted solution of water and vinegar to clean the inside. Rinse
thoroughly before starting.
•
Keep ventilation openings in the appliance enclosure, or the built-in structure,
clear of obstruction. Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the manufacturer.
•
If the ice maker is reused after a long time, the water pump may not pump
sufficient water due to an air block, the add water indicator turns on in this case.
To correct this press the START button again, then the ice maker will work
normally.
•
To ensure the cleanliness of the ice cubes, water in the water reservoir should be
replaced every 24 hours.
•
If the compressor stops for any reason such as water shortage, too much Ice,
power off, etc. Do not start the system right away, wait 3 minutes, and then re-
start the Ice maker.
•
Always use fresh water before starting ice production either at initial installation or
after a long shut-off period.
Store in a Safe Place
When not in use, store your appliance and all its accessories along with the instruction
manual in a safe and dry place.
Summary of Contents for PLA1622
Page 1: ...PREMIUM BENCHTOP ICE MAKER...
