AFTER SALES SUPPORT
Distributed By Prolink Brands Ltd
Email: [email protected] P.O Box 132 398 Sylvia Park
Phone: 0508 776 546
Auckland 1644, New Zealand
Page 8
Control Panel
•
ON/OFF:
Press to turn the unit on or off.
•
ADD WATER:
This light will come on with a long 'DI' noise. You will need to add
water and press the ON/OFF button to restart the Ice maker.
•
ICE FULL:
This light will come on with a 'DI, DI' noise when the ice has reached
the maximum capacity of the storage cabinet. Press the ON/OFF button to restart
the Ice maker after some of the ice has been taken away.
INSTRUCTIONS
Operation:
1.
Open the lid and fill the water reservoir with water.
Note: Make sure the water level is not over the Ice collecting tray.
2.
Connect to a suitably rated power supply.
3.
Press the ON/OFF button to turn the unit on. The ice maker will begin to operate.
Note: For the first three cycles, the ice may be smaller and irregular in size.
4.
If the indicator ADD WATER is red with 'DI' noise, take out the basket and add
water as per step 1
，
then press ON/OFF to restart the ice maker
Note: If no water is pumped up to the water tray over two cycles but the water in
the tank full, please move the unit over a sink and remove the silicon stopper. let
several drops water runs out and then try again.
5.
If the indicator ICE FULL is in red with 'DI DI' noise, please take out the ice with
the scoop.
Note: When the ice collecting tray is full please remove the ice immediately, Do
not allow the ice collecting tray to overfill.
6.
Press the ON/OFF button to stop the machine
Summary of Contents for PLA1622
Page 1: ...PREMIUM BENCHTOP ICE MAKER...
