OPERATION
Before First Use
Read all of the instruction included in this manual.
Make sure that the oven is unplugged and the Timer control is in the “OFF” position.
Wash all the accessories in hot, soapy water or in the dishwasher.
Thoroughly dry all accessories and re-assemble in oven, plug oven into outlet and you are ready to
use your new toaster oven.
After re–assembling your oven, we recommend that you run it at the highest temperature (250
℃
) on
the toast function for approximately 15 minutes to eliminate any packing residue that may remain
after shipping. This will also remove all traces of odour initially present.
PLEASE NOTE:
When first used there may be a small amount of smoke or vapours, this is normal. The
heating elements are coated with a protected coating during transit to protect them from possible
corrosion.
Operating Instructions
Operation
1.
Place the Baking/Crumb Tray on the lowest support guide.
2.
Place the wire rack on the unit support guide at the height required (if it needs to be at the lowest
setting, place on top of the baking tray and slide both in together).
3.
Place food on the wire rack.
4.
Brush food with sauces or oil, as desired.
5.
Food should be placed as close as possible to the top heating element without touching it.
6.
Turn timer knob to the required operation time.
7.
Turn food over midway through the required cooking time.
8.
When cooking is complete, turn the time control to “OFF”.
WARNING:
TO AVOID RISK OF INJURY OR BURNS, DO NOT TOUCH HOT SURFACES WHEN OVEN IS
IN USE. ALWAYS USE OVEN MITTS.
CAUTION:
Always use extreme care when removing bake tray, wire rack or any hot container from a
hot oven. Always use the rack handle, or an oven mitt when removing hot items from the oven.
Using your Electric oven
Please familiarize yourself with the following oven functions and accessories prior to first use:
Temperature Control
: choose the desired temperature from 100
℃
to 250
℃
for baking, Grilling or
toasting.
Timer Control:
when operating the timer control, turn knob to the right (clockwise) to the cooking
time required. The timer bell will ring at the end of the programmed time and will turn the power off.
Please note check cooking progress regularly and adjust for more or less time as required during the
cooking process.
Oven Function Control:
The options for oven operation are; Off, Upper Element, Lower Element
and Both Elements
Hot plate Function Control:
The options for Hot plate operation are; Off, Small Hot plate, Large
Hot plate and Both Hot plates.
NOTE: There is no temperature control for the Hot plates; they operate in either “ON” or “OFF” state.
