20
Bluetooth Printer
Paper Roll Installation
Battery Charging
The battery can be re-charged using either
the mains charger or the car charger supplied.
Charging the printer battery from flat to full should
take 3 hours.
Printer indication light.
Constant Green
= Normal
Long green - short red
= Battery low
Short green - long orange = Charging
Fast red
= Error
To insert a new roll of paper into the printer, slide
the opening catch away from the paper container.
The lid on the paper container will slip open. Insert
a new roll of paper and close the lid.
The Stick Reader is fully compatible with Bluetooth
Thermal Printer (picture right).
Printer On / Off
Press the button once to turn the printer on.
The printer turns itself off automatically if it has
not been used for a few minutes; there is no ‘Off’
button.
WARNING: Ensure the correct adapter is used
for charging the printer battery. The mains and
car adapter for charging the printer are labelled
‘Printer Charger’.
Appendix 2
