16 English
POSSIBLE CAUSE AND SOLUTION
PROBLEM
Unit is not plugged in. Plug power cord into electrical outlet.
Household circuit breaker/ground fault circuit interrupter
has tripped or blown fuse. Reset circuit breaker/ground fault
circuit interrupter, or replace fuse. For assistance, contact
licensed electrician.
Unit is damaged or in need of repair. Cease usage and
unplug. Contact Consumer Service for assistance.
Water level in water tank is low and the LED indicator light is
flashing red. Refill with clean, cool tap water. See HOW TO
USE.
Water tank is empty and auto shutoff has occurred. Refill with
clean, cool tap water. See HOW TO USE.
The ultrasonic disk is dirty and needs cleaned. See CLEANING.
Airflow is blocked. Remove obstruction.
Water tank is not properly installed. Ensure water tank is
attached to base to allow for power connection.
Unit and ultrasonic disk is in need of cleaning. See CLEANING.
Water is too hard. Use distilled water.
The unit fails to
power on.
Unit is not
producing
desired amount
of humidity or
mist output has
ceased.
White dust has
accumulated on
Mist Outlet or on
flooring below.
TROUBLESHOOTING
