manualshive.com logo in svg

Sharper Image SI-755, Owner'S Manual

Share
Download
Sharper Image SI-755 Owner'S Manual Download Page 6

6 English

-   This appliance has a polarized plug (one blade is wider than the other.) To 

reduce the risk of electrical shock, this plug is intended to fit in a polarized 

outlet only one way. If the plug does not fit fully in the outlet, reverse the 

plug. If it still does not fit, contact a qualified electrician. Do not attempt to 

defeat this safety feature.

WARNING:

 

Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the 

equipment.

FCC CONSUMER ADVISEMENT: 

This equipment may generate, use and/

or radiate radio frequency energy that may cause harmful interference to 

radio communications. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to contact (833.800.8669) or 

([email protected]) for further instructions about replacement and 

repair.

Please refer to our website for the most current version of our owner’s guide.

SAVE THESE INSTRUCTIONS

Summary of Contents for SI-755




















Reviews:

No comments

Brands by name

Popular brands

Load more brands