Sharper Image SI-755, Owner'S Manual

Page: 10 / 19

10 English
SETTING VOLTAGE
The Dual Voltage Travel Iron features dual-voltage functionality, which allows it to
function correctly in regions with either 120V or 220V electrical voltage standards.
Voltage is set using the Voltage Selector.
For use in Canada or North America, the voltage selector switch should be
placed in the 120 volt position. For use in most foreign countries, the selector
switch must be placed in the 220 volt position. CONFIRM the voltage available at
each location before using the iron.
NOTE: For connection to a 220 volt supply an adaptor plug may be needed.
IMPORTANT: By default, the Voltage Selector is set to the 120V setting. Be sure to
select the correct voltage for your location before plugging power cord into an
electrical outlet.
TO CHANGE THE VOLTAGE SETTING:
NOTE: These steps assume that Voltage Selector is still set to 120V default.
1. Locate Voltage Selector, recessed inside slot at rear of Main Body. Note the
open notch in middle of Voltage Selector (Figure 1-A).
2. Find a tool with a fine tip - a pen is ideal.