Note:
If the CD lid is left open for more than one minute, it automatically powers
closed.
4. To turn the unit on in the CD mode, press the
POWER/FUNCTION
button
until a
appears on the LCD.
5. To start playback at the beginning of the CD, press the
PLAY/PAUSE/STOP
"
#
/
$
button on the main unit.
6. To select a specific track during playback, press
SKIP +
or
-
until the desired
track number appears. In stop mode, press the
PLAY/PAUSE/STOP
"
#
/
$
button
after you select a track.
7. To fast forward or rewind within a track during playback, press and hold the
SKIP +
or
-
button.
8. To pause playback, press the
PLAY/PAUSE/STOP
"
#
/
$
button. To resume play-
back, press the
PLAY/PAUSE/STOP
"
#
/
$
button again.
9. To stop playback, press and hold the
PLAY/PAUSE/STOP
"
#
/
$
button for two
seconds.
Programmed Playback
The CD player has a programmable memory that allows you to program up to 60
tracks on any disc for playback in any desired order. You may program 60 different
tracks or program certain tracks to play more than once.
1. To program up to 60 tracks for playback, insert the desired CD and press the
CD function button. Wait for the CD player to read the table of contents and
display the total number of tracks and playing time of the disc.
2. To enter programming mode, press the
MEMORY
button on the remote. “00
P-01” appears and “MEMORY” flashes on the display. The first two digits rep-
resent the track number, and the digits after the “P” represent the program
position.
3. To select the first track you wish to program, press the
REV/M-DN
or
FWD/M-UP
button on the remote until the desired track number appears on the display.
4. To confirm track number, press the
MEMORY
button. “00 P-02” appears on
the display.
5. To select the next track you wish to program, press the
REV/M-DN
or
FWD/M-UP
button on the remote until the desired track number appears on the display.
6. To confirm track number, press the
MEMORY
button. “00 P-03” appears on
the display.
7. To program up to 60 tracks, repeat steps 5 and 6 until the memory is full or
you have finished programming. The display returns to the disc information
if no button is pushed for 5 seconds.
CD Functions
Summary of Contents for GT800
Page 2: ......